Extraction forceps for upper and lower teeth, molars, roots and pediatric work, made as single patterns or as complete sets. Iron Art supplies distributors, importers and private-label buyers, with dimensions, finish, marking and packaging agreed against your own drawing or reference sample.
B2B · OEM · PRIVATE LABEL · CUSTOM PACKAGING
A dental extraction forceps holds a tooth or root firmly enough for the clinician to loosen it and lift it from the socket. Two beaks close around the tooth and the handles supply leverage and control. Unlike a general grasping forceps, the beak is shaped for a particular group of teeth, which is why catalogs list dozens of patterns rather than one instrument.
Upper and lower patterns are not interchangeable. Upper molar forceps are normally made as a left and right pair, with beaks that follow the buccal and palatal roots. Lower molar forceps are commonly universal, although some cowhorn designs also come handed. Pediatric (paediatric) forceps are shorter with smaller beaks. Because American and English pattern numbers differ, we work from your drawing, sample or catalog reference rather than the name alone. The comparison below shows how the two systems differ.
Looking for a wider range? See our dental instruments or the forceps section of the catalog.
Confirmed against your approved drawing or sample before production.
| Product | Dental extraction forceps |
|---|---|
| Also listed as | Tooth extraction forceps, dental extracting forceps |
| Types | Upper, lower, anterior, premolar, molar, third molar, root and pediatric |
| Pattern systems | American and English; other patterns by drawing or sample |
| Handing | Upper molar patterns normally as a left and right pair; confirm per pattern |
| Material | Stainless steel; grade confirmed in the agreed specification |
| Overall length | Varies by pattern; confirmed from your reference |
| Beak dimensions | Confirmed from drawing or sample before production |
| Finish | To be agreed, for example satin or polished |
| Supply format | Single patterns or complete sets |
| Packaging | Bulk, standard or buyer-branded |
| Marking | Logo or reference marking by agreement |
| Supply condition | Sterile or non-sterile, as agreed in the quotation |
These are the groupings most catalogs use. Beak and handle detail changes with the pattern and the American or English numbering, so treat the table as a starting point for your inquiry, not a clinical reference.
| Tooth group | Typical forceps form | Confirm |
|---|---|---|
| Upper incisors and canines | Upper straight or universal pattern, narrow beaks | Beak width |
| Upper premolars | Upper universal or premolar pattern | Handle angle, beak width |
| Upper molars | Left and right pair, beaks following the buccal and palatal roots | Pair or single side |
| Upper third molars | Offset, bayonet-style pattern for reach to the back of the arch | Pattern number |
| Lower incisors, canines, premolars | Lower universal pattern, beaks set at an angle to the handles | Beak width |
| Lower molars | Lower molar or cowhorn pattern with pointed beaks for the furcation | Universal or handed |
| Roots | Narrow-beak upper or lower root forceps | Beak width and length |
| Primary teeth | Pediatric forceps, shorter with smaller beaks | Size and tooth group |
American and English are catalog systems rather than single designs.
Both systems cover the same tooth groups. They differ mainly in joint design and leverage, and each carries its own numbering.
| Point | American pattern | English pattern |
|---|---|---|
| Joint | Hinge toward the middle of the instrument, with the jaws lined up in the direction of the handles | Visible screw joint set closer to the beaks |
| Leverage | Standard leverage, with a broad choice of tooth-specific patterns | Fulcrum nearer the working end, giving more leverage for the same hand effort |
| Numbering | Its own pattern numbers | Its own pattern numbers; the same tooth group usually carries a different number |
| How to quote | Pattern number plus drawing or sample | Pattern number plus drawing or sample |
These are general descriptions of the two systems. The joint, handle shape and beak form of any specific pattern are confirmed against your drawing or sample before production.
Each pattern can be ordered singly or placed in an extraction forceps set. Pattern numbers and dimensions are confirmed against your drawing or sample, because they differ between catalogs.
Upper and lower universal patterns. Upper patterns typically cover incisors, canines and premolars; lower patterns have beaks set at an angle to the handles for access to the lower arch. Specify the pattern number and beak width from your reference.
Normally supplied as a left and right pair, with beaks shaped around the buccal and palatal roots. Confirm whether you need the pair or one side.
Lower molar and cowhorn patterns with pointed beaks for the furcation. Some are universal and some are handed, so check each pattern.
Narrow-beak forceps for retained roots and broken-down crowns in the upper jaw. Beak width and overall length are the key points to confirm.
Narrow-beak lower forceps for roots and fragments. State beak width and length, or send a reference piece.
A numbered catalog system with its own handle and beak forms. Quote by pattern number and drawing so the piece matches your existing range. See how the systems differ.
A separate numbering and design tradition, with the joint set closer to the beaks. The same tooth group can carry a different number here, so do not cross-match by number alone.
Shorter forceps with smaller beaks for primary teeth. List the size and tooth group for each pattern you need. Also available as a ten-piece set.
Complete sets built from a pattern list you approve, usually spanning upper, lower and root forceps. Box, tray or pouch packaging is confirmed per order.
The forceps are the same; what changes is how the order is specified, labeled and packed.
Single patterns for catalog ranges, or full sets under your own part numbers, built to the same approved reference each time you reorder.
Supply to a written specification so tender and purchasing teams can compare like with like. Material, finish and dimensions are stated in the quotation.
Your logo, reference numbers and packaging on forceps made to your approved sample. Marking method and artwork are agreed before production.
Both are common. The right choice depends on whether you are topping up a range or building a kit.
| Point | Single patterns | Extraction set |
|---|---|---|
| Best for | Topping up a range, replacing a pattern, catalog listings | Starting a clinic tray, kit listings, outreach and training programs |
| Contents | One pattern per line item | A pattern list agreed in advance, usually spanning upper, lower and root forceps |
| Packaging | Bulk, individual or branded | Box, tray or pouch format to be confirmed |
| Ordering | Quantity per pattern | Number of sets, plus any additional patterns |
Set contents vary between suppliers and ten-piece sets are common, so compare the pattern list rather than the piece count.
Iron Art makes and supplies dental and surgical instruments for buyers who want a defined specification, a sample to approve and repeatable supply. See our OEM and private-label services for how programs are set up.
Send the pattern list, a drawing or a reference piece, and the quantities you expect to order. We review it against your requirements, confirm dimensions, finish and packaging, and agree a sample before production begins.
Whichever supplier you use, these are the points to inspect when a sample arrives.
A straightforward route for buyers sourcing dental extraction forceps in volume.
Pattern list, drawing or reference piece, quantities, finish and packaging.
Specification confirmed in writing, with any OEM or marking options priced.
Inspect a sample against your reference before production is released.
Reorders follow the approved specification, including private-label packs.
Short answers on patterns, materials, sets and supply.
They hold the crown or root of a tooth firmly so the clinician can loosen it and lift it out of the socket. The beak shape is matched to a tooth group, which is why upper, lower, molar, root and pediatric patterns are listed separately.
Start with the jaw and the tooth group, then check the root anatomy the beak has to fit. The selection table on this page gives the usual groupings. For an order, confirm each pattern by drawing, sample or catalog number rather than by name alone.
American pattern forceps generally have a hinge toward the middle of the instrument. English pattern forceps have a visible screw joint set closer to the beaks, which gives more leverage for the same hand effort. Each system has its own numbering, so the same tooth group can carry a different number in each. Match by drawing or reference piece when comparing suppliers.
Upper molars have buccal and palatal roots, so the beaks are shaped differently on each side and the instrument is handed. Lower molar patterns are commonly universal, although some cowhorn designs also come as a left and right pair.
Yes. They are shorter and have smaller beaks sized for primary teeth. Pediatric patterns are normally listed as their own line items, so state the size and tooth group in your inquiry.
Stainless steel is the standard option, with the exact grade and surface finish confirmed in the agreed specification. Stainless forceps are generally intended for repeated use, but cleaning and sterilization follow the buyer's own validated reprocessing routine.
Yes. A set can be built from a pattern list agreed with you, usually spanning upper, lower and root forceps, with box, tray or pouch packaging to be confirmed. Ten-piece sets are common in the market, so compare the pattern list rather than the piece count.
Yes. Logo marking, reference numbers and packaging can be agreed for private-label programs, and OEM work follows your drawing or approved sample. Quantities are discussed per program.
List the pattern names or numbers, left/right or universal, overall length, material and finish, quantity, packaging and marking. A photograph, drawing or the instrument you currently use will speed up the quotation considerably.
Send the patterns you need, quantities and packaging requirements. A drawing, photograph or reference piece of your current forceps will speed things up.